Have any question?   +86-189-9440-7971 (Joanna Li)
You are here: Home » Product » Band Heater » Ceramic Band Heater » Band Heater with 90 degree Eropean Plug

Product Category

Get Touch With Us

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

Band Heater with 90 degree Eropean Plug

Reheatek mica band heaters are efficient and economical solutions to the indirect heating applications at medium temperature up to 480°C. Mica Bands are commonly used in Plastics Injection Molding, Extrusion, Blow Molding applications as well as in Commercial Cooking, Dies and Electric Motors.

Availability:
Quantity:


MICA BAND HEATER

Reheatek mica band heaters are constructed by winding a nickel-chrome resistance ribbon around mica insulation and encapsulated in a stainless steel sheath. With temperature capabilities of up to 480°C, these heaters are ideal for plastic processing applications and for anywhere heat is needed on a round or curved surface.

 

CERAMIC BAND HEATER

Ceramic band heaters are designed with spirally wound inner resistance coils evenly threaded through interlocking insulated ceramic "tiles". The ceramic core of tiles is housed beneath a stainless steel sheet with serrated edges. Typical applications are plastic molding, extrusion and molding presses.

 

NON-STANDARD LOCATION OF LEADS OR TERMINALS

Terminations could be offset, paralleled, centered, or at each end. Lead wires are available.

Leads or terminals may be located at any reasonable place along the heater for applications where standard connections may be inaccessible.

 

HOLES AND CUTOUTS

Mounting holes locations could be customized. Please provide drawing for hole dimensions and locations.

 

ONE PIECE OR TWO PIECE CONSTRUCTION

2 Piece construction is very suitable for locations where 1 piece is difficult to be installed. 

2 Piece construction is available with any termination or clamping styles.


BUILT-IN STRAP OR SEPARATE STRAP 

Built-in strap and separate strap both provide secure and strong clamping.

Built-in strap - the top sheet is made into a strap by placing barrel nut fasteners on either side of the gap.

Separate strap - it's recommended wherever possible. Typically used in smaller diameters.

 

BENT-UP FLANGE

It's for narrower designs, available with any termination style. It's the most economical clamping mechanism.

 

HINGES

It's designed for two-section heater band for applications where heaters cannot be slid over. 



Technical  parameters

Voltage

110V/220V/230V/240V/380V/415V

Power

Customized

Cold Withstand Voltage 

AV2000V/ 0.75mA/ 3s

Hot Leakage Current

≤2mA

Wattage Tolerance

+5%, -10%

Max. Watt Density

3.5W/cm² (Standard 3W/cm²)

Resistance Tolerance

+10%, -5%

Max. Temperature

480℃ - Mica

600℃ - Ceramic



Main Materials

Sheath 

Stainless steel 304

Resistance Wire

Ni80Cr20

Insulation

Mica/Ceramic

Lead Wire

Fiberglass (steel protective sleeve, steel hose & braid are available)

Terminal

Thread, ceramic, metal box, plug




Features

1. Energy efficient, less power consumption

2. Provide uniform heat distribution

3. Thermally insulated

4. Uniform temperature

5. Easy to install and remove

6. Highly flexible

7. Long service life

Design Details

Please provide the following information:

1. Operating temperature

2. Heated medium

3. Voltage and phase

4. Rating power

5. Termination types

6. Mounting method

7. Detail dimensions or drawing

8. Holes and cutouts' position 

Note:The more details provided, the better it'll be designed and fits the application


  

Reheatek ceramic band heater

Reheatek ceramic band heater

Reheatek ceramic band heater




Previous: 
Next: 
As a professional electric heater manufacturer, Reheatek is commited to the production of high-quality cartridge heater, tubuler heater, immersion heater and temperature sensor.

OUR PRODUCTS

QUICK LINKS

CONTACT US
 WhatsApp: +86-189-1409-1124 (Joanna Li)
 Wechat: +86-188-2552-5613
 Tel: +86-512-5207-9728
 Mobile Phone: +86-189-1409-1124 (Joanna Li) 
 E-mail: joannali@reheatek.com
Address: Changsheng Industrial Park, No.7 Jiancheng Road, Renyang Village, Zhitang Town, Changshu City, Jiangsu 
Province, China, 215539
Get Touch With Us
Copyrights ©  2024 Suzhou Reheatek Co.,Ltd. All Rights Reserved.  苏ICP备19012834号-5 Supported by leadong.com | Sitemap | Privacy Policy.