Design  Engineering  Manufacture

Bent Up Flange Ceramic Band Heater Bent Up Flange Ceramic Band Heater

Reheatek mica band heaters are efficient and economical solutions to the indirect heating applications at medium temperature up to 480°C. Mica Bands are commonly used in Plastics Injection Molding, Extrusion, Blow Molding applications as well as in Commercial Cooking, Dies and Electric Motors.

Quantity:
Share this:
  • Options
  • Technical Parameters
  • Materials
  • Features & Design
  • More Possibilities


MICA BAND HEATER

Reheatek mica band heaters are constructed by winding a nickel-chrome resistance ribbon around mica insulation and encapsulated in a stainless steel sheath. With temperature capabilities of up to 480°C, these heaters are ideal for plastic processing applications and for anywhere heat is needed on a round or curved surface.

 

CERAMIC BAND HEATER

Ceramic band heaters are designed with spirally wound inner resistance coils evenly threaded through interlocking insulated ceramic "tiles". The ceramic core of tiles is housed beneath a stainless steel sheet with serrated edges. Typical applications are plastic molding, extrusion and molding presses.

 

NON-STANDARD LOCATION OF LEADS OR TERMINALS

Terminations could be offset, paralleled, centered, or at each end. Lead wires are available.

Leads or terminals may be located at any reasonable place along the heater for applications where standard connections may be inaccessible.

 

HOLES AND CUTOUTS

Mounting holes locations could be customized. Please provide drawing for hole dimensions and locations.

 

ONE PIECE OR TWO PIECE CONSTRUCTION

2 Piece construction is very suitable for locations where 1 piece is difficult to be installed. 

2 Piece construction is available with any termination or clamping styles.


BUILT-IN STRAP OR SEPARATE STRAP 

Built-in strap and separate strap both provide secure and strong clamping.

Built-in strap - the top sheet is made into a strap by placing barrel nut fasteners on either side of the gap.

Separate strap - it's recommended wherever possible. Typically used in smaller diameters.

 

BENT-UP FLANGE

It's for narrower designs, available with any termination style. It's the most economical clamping mechanism.

 

HINGES

It's designed for two-section heater band for applications where heaters cannot be slid over. 


Technical  parameters

Voltage

110V/220V/230V/240V/380V/415V

Power

Customized

Cold Withstand Voltage 

AV2000V/ 0.75mA/ 3s

Hot Leakage Current

≤2mA

Wattage Tolerance

+5%, -10%

Max. Watt Density

3.5W/cm² (Standard 3W/cm²)

Resistance Tolerance

+10%, -5%

Max. Temperature

480℃ - Mica

600℃ - Ceramic



Main Materials

Sheath 

Stainless steel 304

Resistance Wire

Ni80Cr20

Insulation

Mica/Ceramic

Lead Wire

Fiberglass (steel protective sleeve, steel hose & braid are available)

Terminal

Thread, ceramic, metal box, plug




Features

1. Energy efficient, less power consumption

2. Provide uniform heat distribution

3. Thermally insulated

4. Uniform temperature

5. Easy to install and remove

6. Highly flexible

7. Long service life

Design Details

Please provide the following information:

1. Operating temperature

2. Heated medium

3. Voltage and phase

4. Rating power

5. Termination types

6. Mounting method

7. Detail dimensions or drawing

8. Holes and cutouts' position 

Note:The more details provided, the better it'll be designed and fits the application


  

Reheatek  ceramic band heater

Reheatek  ceramic band heater




×

Contact Us